Both TestPro and Network Service Assistant (NSA) provide comprehensive test functionality for verifying Power Over Ethernet deployments. All PoE standards including 802.3af/at/bt are supported up to 90W. Simply unplug the RJ-45 connector from the back of your Powered Device (PD), and plug that cable into TestPro or NSA, then select the 802.3 standard that particular device requires for power load. This allows the tester to emulate your PD to see the network and negotiate with the Power Source Equipment (PSE) the same way.
In addition to operational tests on PoE, TestPro and NSA can characterize the cabling links for resistance unbalance parameters in accordance with ANSI/TIA 1152-A test standard.
Power Over Ethernet Testing Overview
With the addition of the new AD-NET-PASSTHRU adapter, users can enhance the Ethernet and PoE testing and troubleshooting capabilities of TestPro or NSA with the ability to go in-line between the PSE and PD.
This unique test adapter allows users to connect their TestPro or NSA in-line between the switch and the end device, such as a PoE camera, and test while the end device is in use.
The testing provides details on connected speed up to 1Gbps and SNR (Signal-To-Noise Ratio) on both sides of the connection as well as the power draw of the connected PoE device. The information may be examined in real time and saved. The test can also be run as a log capture to help troubleshoot or test a link under load for extended periods of time, and the log can be retrieved using TestDataPro test results management software.
Test parameters include:
Test Adapter (single adapter)
TestPro and Network Service Assistant
